Supplied as standard. With a digital display, it can manage up to 3 temperature levels. Battery powered.
Robur gas unit heaters can be supplied with support brackets, for easy and safe installation.
Tubular support bracket
Extremely easy to install, it is suitable for all models and is supplied with ties-rods, bolts and washers to anchor to the wall.
Revolving wall support bracket
This allows for an easy and correct installation of the gas unit heater.
Complete with external counterplate.
External support bracket kit
Manufactured specifically to be weather-resistant, it allows extremely easy installation of the appliance on the outside wall (F C and M C Series).
Revolving wall support bracket (B 15 Series)
It allows for an easy installation. The heater can be positioned in horizontal, inclined or vertical position. The bracket permits also to install the heater in a non parallel position respect to the wall.
Duct accessories for exhaust air outlet and air inlet pipes
Ducts for separate exhaust outlet
Additional flue and combustion air pipes may be added and are all available on request.
Aluminium alloy and stainless steel double external terminals
The new external terminal for 80mmdiameter (separate) inlet and outlet ducts is a Robur personalized accessory. In addition to its modern design, the extremely limited projection (4.3 cmfromthe wall) is another of its exclusive characteristics. The kit also includes the external terminal and fitting and fixing elements.
Roof and wall concentric flue terminal kits
A concentric terminalmust be used for balanced flue applications. These are available for either roof or wall outlet.
The louvres allow the airflow to be diffused in the desired direction, extending the air throw zone of the appliance, and also obstacles (such as columns, machine tools, etc.), for which direct heating is not appropriate, to be avoided.
Air duct accessories
Mixing chamber kit (M C and F C Series).
Air filter and filter holder kit.
Air intake filter (M xt Series).
In synthetic netting, washable on the mounting frame.
Higher efficiency and energy savings for better comfort thanks to the automatic modulation of the flame and ventilation
EFFICIENCY UP TO 105%
SAVINGS UP TO 25%
30 MINUTES... AND THE LARGEST SPACES ARE WARMED!
High thermal efficiency and respect of the new norms about the heating installation system. The choice of condensation for Gas Unit Heaters allows to obtain thermal efficiencies over 105% and consequently comparable with the best condensing boilers on the market. The remarkable advantage of Gas Unit Heaters is that the water distribution is not required, presenting a better global efficiency of the system.
Perfect modulation of the heating output. The energy needed is grant by the heaters in a uniform and adequate mode for any single part of the premises. Each heater is able to give its own heating output proportioned to heating demand. In this way the modulation will support an average efficiency of functioning much more higher than the nominal value of the system and a constant ambient temperature in any functioning condition.
CO and NOx emissions practically nil. The control of the total premix combustion permits also to avoid problems on the exhaust flue system.
Workshops and factories.
All premises where high comfort and high efficiency are required.
Commercial buildings and show rooms.
Sports halls and fitness centres.
Heat output G30: nominal kW 29.2 - min. kW 15.6
Heat output G45: nominal kW 43.3 - min. kW 15.6
Heat output G60: nominal kW 56.2 - min. kW 20.2
Heat output G100: nominal kW 90.2 - min. kW 33.5
Efficiency G30: nominal 97.3% - min. 105.3%
Efficiency G45: nominal 96.3% - min. 104.3%
Efficiency G60: nominal 97.0% - amin. 104.6%
Efficiency G100: nominal 97.0% - min. 105.7%
Airflow rate(1) G30: max. 2,700 m3/h - min. 2,300 m3/h
Airflow rate(1) G45: max. 4,000 m3/h - min. 2,340 m3/h
Airflow rate(1) G60: max. 5,350 m3/h - min. 3,310 m3/h
Airflow rate(1) G100: max. 8,250 m3/h - min. 5,200 m3/h
Installed wattage G30: W 350
Installed wattage G45: W 450
Installed wattage G60: W 750
Installed wattage G100: W 900