Classic line.

Compare the results obtained by the Robur heating system with gas unit heaters against two other types of heating systems. The system with a traditional floor-standing gas unit heater brings the room to comfort conditions in 1.5 hours, while the radiant tube system is not able to bring the room to the required temperature conditions even after 4 hours of operation.

Robur gas unit heaters reduce preheating times to a minimum and maintain the comfort temperature thanks to the low thermal inertia. Even the largest rooms are immediately warm in a short time because it works in the absence of carrier fluid, unlike water systems.

Time required to achieve comfort temperature

Time required to preheat and to achieve comfort temperature

Each gas unit heater is stand-alone and completely independent: heat where you want when you want. It’s ideal when considering modifications, relocations or extensions of the system and allows productive use of the interior areas thanks to the wall-mounted installation.

Robur gas unit heaters heat rooms with a very low heat stratification due to the characteristic ground effect.
The conformation of the heat exchangers and the special aluminium alloy divide the air flow into different layers with different temperatures, warmer at the bottom and cooler at the top. This eliminates heat loss in the higher areas of the room, which is good for comfort and saves energy.

Heat stratification

Robur gas unit heaters are installed directly in the room to be heated and wall-mounted, which guarantees a double savings in terms of costs and space. There’s no need to build a traditional central heating plant and no floor space is lost in rooms or production areas.

All you need is a single hole in the wall for the air intake/flue gas exhaust ducts and connection to the gas and power supply mains and the gas unit heater will be immediately operational.